Ford Mustang News

I couldn't load the video. To view go to    http://wp.me/pKHNM-AN


I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.
 



1st collector for The Problem
 Follow my videos on vodpod
 
The kit is from TMI ...

In a few days I'm going to look at a '66 convertible that has been under a cover for the last 10 years.. I have no idea of it's condition, motor type or anything... I would like to go into this prepared, so HERE IS MY QUESTION....

The seller is saying $4000 for the car.. At what point is it NOT worth $4000? Without a motor? (obviously if it's been in a really bad accident)... No interior, etc.....

howdy guys, i dont really own a mustang lol, ive got a falcon. Its not as fast as the mustangs today, but i think it gets the job done.

my 98 gt stop charging ,do i replace the alternator or is something else please help

Will the 66 Emer Flasher work on our 65's? If so, where to install it? I was told on the 65 you would put it on the driver side and on the 66 it came in the glove box. Has anyone installed one in their 65? Thanks

Hello i want to know if you can run edis with a msd mod 6 or how can i control my edis because i have a carb

hello, i have just put my '65 falcon on the road and im having some issues with it stalling. Its only when im pushing on the brakes and coming to a stop, then it struggles to start when i try to turn it over. Its got fresh fuel and new plugs and wires. I know its not a mustang but i could use some help trying to trouble shoot this problem.

I have some left over parts from my 1969 Mach One project, and I also have a 1969 coupe that I am parting out certain parts from. I have a complete interior from the coupe to sell. I have a couple of the simulated wood grain clock covers for a Mach One or a Grande. I have a like new 20 inch rad, and another 20 inch rad that is older, but did not leak. I have a T bird 302 motor and transmission....

Not sure how to replace my worn GT emblems on my 66 coupe.  There does not seem to be easy access to the retaining clips.  Is there a simple way to replace these badges?

Thanks!

I can not believe what someone paid for this used air cleaner. I have one of these at home that I have had on a self for years but also believe that the fome can come apart and start a fire or the car could backfire and cause a fire. These have been around for many-many years. You can find these all day for around $15.00 or so on ebay. I think these guys where just determined to get this. http:...

Hello!

I work in a locksmith specialized with eletronic for cars in Brazil,
So, I´m trying to solve a car problem, and I hope some help, please.

The car is a Shelby Cobra replica 4.6l
Mustang engine V8 - Automatic transmission
Pats external system

PCM informations: PTP2  -- DP9SA
4R3A-12A650-PC

So, I need some help about how to do the necessary configurations for a PCM (that has never

beem ...

hello guys

my problem is really frustrating, i ve been trying to sort it out for last month.
it is 289 C code 1965
it starded from unequal engine running, i replaced all old worn out parts like spark plugs, wires, coil, dist. cap, finger etc. it didnt help. checked gap if it was set to 0,38mm( 0,017 inch ?) anyway like the book says, i checked the carb if all the settings were right and they we...

I have a newly rebuilt 289. The cylinders were bored 60 over and new flat top pistons installed. The motor runs a little hot so I took out the old fan and put in a 14" electric fan. Where would be the best place to connect the wires so that it does not rob electricity from spark. Thanks for the help.

Helping my son with his 66 mustang coupe 289 automatic.  Seems to be grap bag of parts from multiple year and model fords.  We need to replace the flexplate, but before we do should we makes some changes to get us back to 1966 mustang or are we good to go?  NOT going to make it a concours show car.  Runs fine except for the bad flexplate.  Hard to determine correct flexplate.

Engine casting is ...

Hello I am a new member here, I missed this forum my first post was in the 2011 mustang contest, anyway I can't post my car's pic because I am upgrading it and planning to sell it to a friend. I will definitely buy a new car but still looking for a good make and model.

Hi, I just registered here to ask for help and share my opinions. My sister and I bought this car
and my dad gave me his car 2009 Ford mustang
[img]http://www.theautoabc.com/wp-content/plugins/wp-o-matic/cache/200909/911a6_2009_Ford_Mustang_45_Ann.jpg[...

hi, wow, very impressed by FAQ (Soaring) web lists.  the old clutch question. my 66 289 4-speed toploader with stock 157 th fly wheel, stock #6 280:1 rear end, motor some mods- elder 4 barl carb/intake, cheap headers, dual point distrib, diff cam, all done (rebuilt) by someone else.  i dont want a stock style clutch, been hearing spec or centerforce up grade is way easyer on the leg and car par...

I'm not sure of best year to go for. I thought 1966? Definitely a V8, manual box. What should I look for? Importing costs will be around 5000 including taxes, so it needs to be good enough to justify that. Any tips would be very welcome.

I put new plugs in the Mustang and drove a few miles and noticed a little knock so I pulled the valve covers and found one of the rocker arms was not on the push rod so I also pulled the intake manifold (was going to pull it anyway) and sure enought the push rod was bent. I pulled all the plugs out and the plug on number 3 pistion had oil on it and that is where the bent push rod was. What woul...

just wondering if anyone could estimate value of 69 gt fastback with 351 winsor. car is mostly original meaning intact with original motor. as far as i could tell it is probably a 4 in condition. it was my brothers car since high school back in 1978, i am trying to value it for his estate. any help is greatly apreciated thanks